Hood Release Lever
2002-2006 Honda Cr-v RD4
Description
My hood lever in Honda CR-V II was broken and now I've got beautifull new one. Attached by 5mm zip-tie. New one layed on the old, broken one. To rebuild: https://cad.onshape.com/documents/ec91535ef19587f9b8887dba/w/5780b5219fca2657e05d6dfc/e/f20308453688a363720197ca WARNING: Rounded only (both sides) is hard to catch and pull, arrowed one at the bottom is easier to use.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
My hood lever in Honda CR-V II was broken and now I've got beautifull new one. Attached by 5mm zip-tie. New one layed on the old, broken one. To rebuild: https://cad.onshape.com/documents/ec91535ef19587f9b8887dba/w/5780b5219fca2657e05d6dfc/e/f20308453688a363720197ca WARNING: Rounded only (both sides) is hard to catch and pull, arrowed one at the bottom is easier to use.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed