Head Unit Lcd Screen Bracket
2002 Honda S2000 AP1
Description
This is a bracket that lets you attach a Joying 8-inch radio LCD screen to your OEM console radio door so that you can see and access the screen from a more ergonomic (roughly) 45 degree angle. The lower tab slides into the slot on the folded-down door and the screen snaps in. The extra 2 holes at the top are optional if you want to attach the bracket to the vents above the bracket with zip ties, or a coat hanger wire, etc. But the bracket stays pretty steady without these. I made this for a 2002 S2000 (for a Joying JY-HQS01N4G), your model year may vary. Supports are not necessary if you print it lying on its face. Original file at https://www.tinkercad.com/things/4lnHFZvBiTD
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a bracket that lets you attach a Joying 8-inch radio LCD screen to your OEM console radio door so that you can see and access the screen from a more ergonomic (roughly) 45 degree angle. The lower tab slides into the slot on the folded-down door and the screen snaps in. The extra 2 holes at the top are optional if you want to attach the bracket to the vents above the bracket with zip ties, or a coat hanger wire, etc. But the bracket stays pretty steady without these. I made this for a 2002 S2000 (for a Joying JY-HQS01N4G), your model year may vary. Supports are not necessary if you print it lying on its face. Original file at https://www.tinkercad.com/things/4lnHFZvBiTD
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed