Cup Holder
2003-2010 Bmw 5 Series E60/E61
Description
For the E60 and E61 center console: A cup holder for cans/bottles up to 2.95 inches in diameter, fitting all standard sizes, including McD's cups. One holder for cans/bottles up to 2.95 inches and another for up to 2.56 inches. The brackets must be screwed in place or alternatively fixed with a pin (the pin must be glued into the mounts, or the screws must be tightened with nuts in such a way that the bracket can still move freely). Afterward, a rubber band must be stretched around all brackets of a holder—insert the rubber band into the slot. This allows cans smaller than 2.56 inches in diameter to be securely held. The cup holder is fitted to the round mounts under the armrest. The original part (shelf) must be removed. This also allows the cup holder to be folded upwards, giving access to the storage space under the holder.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
For the E60 and E61 center console: A cup holder for cans/bottles up to 2.95 inches in diameter, fitting all standard sizes, including McD's cups. One holder for cans/bottles up to 2.95 inches and another for up to 2.56 inches. The brackets must be screwed in place or alternatively fixed with a pin (the pin must be glued into the mounts, or the screws must be tightened with nuts in such a way that the bracket can still move freely). Afterward, a rubber band must be stretched around all brackets of a holder—insert the rubber band into the slot. This allows cans smaller than 2.56 inches in diameter to be securely held. The cup holder is fitted to the round mounts under the armrest. The original part (shelf) must be removed. This also allows the cup holder to be folded upwards, giving access to the storage space under the holder.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed