Cupholder Insert
2003-2009 Lexus Gx 470
Description
This was made to help improve the horrible stock GX470 cupholder. This was sized to my 2005 GX and may need minor fitting to get a tight fit. I suggest printing at 30% or more infill to add some weight to the insert. The insert was sized for YETI or other common insulated 32oz cups but works fairly good with smaller cups too. You will need to remove the stock Lexus adjustable divider before using this. To "install" tuck the front tongue under the overhanging trim and wedge the rear of the cupholder down against the rear open cupholder door.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This was made to help improve the horrible stock GX470 cupholder. This was sized to my 2005 GX and may need minor fitting to get a tight fit. I suggest printing at 30% or more infill to add some weight to the insert. The insert was sized for YETI or other common insulated 32oz cups but works fairly good with smaller cups too. You will need to remove the stock Lexus adjustable divider before using this. To "install" tuck the front tongue under the overhanging trim and wedge the rear of the cupholder down against the rear open cupholder door.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed