Bonnet Hood Strut Clip
2003-2014 Mercedes Vito / Viano W639
May 6, 2026
by CFin
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
The clip used to hold the bonnet/hood strut in its storage position on the W639 Mercedes vehicles. The design has been changed slightly (Tab thickened) to improve robustness of the printed part. I printed in PETG for strength and the part was printed 'on end' with a small amount of support for the through hole.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
The clip used to hold the bonnet/hood strut in its storage position on the W639 Mercedes vehicles. The design has been changed slightly (Tab thickened) to improve robustness of the printed part. I printed in PETG for strength and the part was printed 'on end' with a small amount of support for the through hole.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed