Hood Vent
2003-2008 Nissan 350z Z33
Description
These hood vents are designed to fit in the middle and on the sides of a stock 350Z hood, however I'm sure they would work just as well in many other applications. The slat angles increase towards the back of the vent for optimum airflow. Designed to be attached to the hood with M3 counter-sunk screws. I'm only including one side, flip in Cura or your slicer of choice to print a mirror vent for the other side.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
These hood vents are designed to fit in the middle and on the sides of a stock 350Z hood, however I'm sure they would work just as well in many other applications. The slat angles increase towards the back of the vent for optimum airflow. Designed to be attached to the hood with M3 counter-sunk screws. I'm only including one side, flip in Cura or your slicer of choice to print a mirror vent for the other side.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed