Antenna Housing (dolphin)
2003-2011 Saab 9-3 2G
May 9, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
Antenna housing for Saab 9-3 (2G) A couple of notes about the model. I set infill to 0. Bottom layers also 0. Walls were set to cover the entire interior of the model. Supports were enabled. Layer height was 0.3 mm. Printed separately from layer 9 onwards (the antenna itself) and the skirt separately (everything up to layer 9).
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
Antenna housing for Saab 9-3 (2G) A couple of notes about the model. I set infill to 0. Bottom layers also 0. Walls were set to cover the entire interior of the model. Supports were enabled. Layer height was 0.3 mm. Printed separately from layer 9 onwards (the antenna itself) and the skirt separately (everything up to layer 9).
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed