6x9 Speaker Adapter
2003-2008 Toyota Corolla
Description
This is an adapter I designed to mount a standard 6x9 speaker in the rear deck of an 08 corolla. It should work in 03-08 rollas (among other toyotas with similar mounting) and with most 6x9 speakers. Uses the original speaker mounting screws for the outer holes and 1/2 inch screws to mount the speaker to the adapter. My original prints, in PLA, warped and cracked in the summer. Have since reprinted in ABS.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is an adapter I designed to mount a standard 6x9 speaker in the rear deck of an 08 corolla. It should work in 03-08 rollas (among other toyotas with similar mounting) and with most 6x9 speakers. Uses the original speaker mounting screws for the outer holes and 1/2 inch screws to mount the speaker to the adapter. My original prints, in PLA, warped and cracked in the summer. Have since reprinted in ABS.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed