Center Console Organizer
2004-2008 Ford F-150
Description
2004-2008 F150 center console. I couldn't find one online so I decided to design and print my own. I printed this in 3 parts using PLA w/ a 60 infill. The tolerances are super tight (.2) so I had to use a rubber mallet to actually get everything lined up correctly, but seemed to fit very snug. I ended up drilling a hole opposite of the insert side to keep that side from hanging, but you may or may not need to do that depending on what you'll put in it.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
2004-2008 F150 center console. I couldn't find one online so I decided to design and print my own. I printed this in 3 parts using PLA w/ a 60 infill. The tolerances are super tight (.2) so I had to use a rubber mallet to actually get everything lined up correctly, but seemed to fit very snug. I ended up drilling a hole opposite of the insert side to keep that side from hanging, but you may or may not need to do that depending on what you'll put in it.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed