Volume Knob Coupler
2004 Ford F-150
Description
A replacement part for a F-150 2004 stock radio, it is the volume knob coupler, this plastic part connects the knob you use to the actual hardware knob on the circuit board. Mine broke in half and wouldnt glue so decided to print one instead. The final print does come out a little small due to plastic shrinkage and I had to knife out / drill the holes to fit. I think printing the model ~5-10% larger should work without having to modify the part post print.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
A replacement part for a F-150 2004 stock radio, it is the volume knob coupler, this plastic part connects the knob you use to the actual hardware knob on the circuit board. Mine broke in half and wouldnt glue so decided to print one instead. The final print does come out a little small due to plastic shrinkage and I had to knife out / drill the holes to fit. I think printing the model ~5-10% larger should work without having to modify the part post print.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed