Vent Pod Gauge Mount 52mm
2005 Audi A4 B6
Description
This is a pod for the boost gauge in my 2005 Audi A4 B6. I couldn't find anything created for this car to mount a gauge and I didn't want to buy the replacement vent with the gauge in the centre. To install the vacuum line and power to the pod, I drilled a 1/4" hole through the air duct to feed the lines up through. I had to wrap my actual gauge with a couple layers of tape for it sit snug.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a pod for the boost gauge in my 2005 Audi A4 B6. I couldn't find anything created for this car to mount a gauge and I didn't want to buy the replacement vent with the gauge in the centre. To install the vacuum line and power to the pod, I drilled a 1/4" hole through the air duct to feed the lines up through. I had to wrap my actual gauge with a couple layers of tape for it sit snug.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed