Part Description

Toyota Tacoma Cup Holder - This is designed to fit into the existing cup holder on the center console on 2nd generation 2005-2015 Toyota Tacomas (may fit newer versions but have not verified). I found the stock cup holder to be too small for most cups. I originally designed this to fit a Yeti tumbler, but found that it fit a lot of other cups too. I made a cutout in the rear for cups with handles as well, and placed it at an angle so the handle can be picked up from the side. I did not show all the cups it will fit, but I know it will also hold most fast food medium cups and soda cans too. Of course there will be many larger cups that will not fit, but the Tacoma front cup holders do a good job for those larger sizes. Also, note that I put two indexing marks on the front and back sides of the Tacoma Cup Holder, so that it can be aligned with the slope of the console. The indexing tabs are to be facing directly forward and rearward. The tapered fit should be just tight enough to lock the cup holder in place when pushed all the way down. By the way, the perspective in the pictures I took make the cup holder look like it is at an angle, but in reality the cup is held perfectly vertical to the ground just like the original Tacoma cup holder

Print Instructions

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed