Head Unit Trim Clip
2005-2015 Toyota Tacoma 2nd Gen
May 4, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
Had to lengthen and flatten the clip a bit to make it work for the Tacoma head unit bezel. Gray PLA prototypes in picture were too short and would break or pop off into the dash. Yellow cip is the original I found under the cup holders (same clip used) AFTER I finished installing the radio, lol. Printed longer final version in ABS for more flexibility.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
Had to lengthen and flatten the clip a bit to make it work for the Tacoma head unit bezel. Gray PLA prototypes in picture were too short and would break or pop off into the dash. Yellow cip is the original I found under the cup holders (same clip used) AFTER I finished installing the radio, lol. Printed longer final version in ABS for more flexibility.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed