Sunroof Rail Guides
Description
These 3d printed parts are the replacement guides for the 2 clips on each side on the sunroof rail that usually break. OEM Assembly - costs 1200€~ They are not identically visually but they do the job and are tight fitted. I will send you a manual on how to install them if you need them without removing the fabric. Package comes with 4 clips (2 for each side) I can send this to any country via postal. I also offer free replacements if they ever break, been selling them for awhile. Contact me at convertibleclips @ freelo.org if you need them. (spaced out because of bots) Material is ABS 80%
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
These 3d printed parts are the replacement guides for the 2 clips on each side on the sunroof rail that usually break. OEM Assembly - costs 1200€~ They are not identically visually but they do the job and are tight fitted. I will send you a manual on how to install them if you need them without removing the fabric. Package comes with 4 clips (2 for each side) I can send this to any country via postal. I also offer free replacements if they ever break, been selling them for awhile. Contact me at convertibleclips @ freelo.org if you need them. (spaced out because of bots) Material is ABS 80%
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed