The part that breaks if you don't close the glove box carefully (too quickly). I designed this part to fit M4x12 bolts that will hold the pulls. The bolts can be purchased from an AliExpress link.
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
The part that breaks if you don't close the glove box carefully (too quickly). I designed this part to fit M4x12 bolts that will hold the pulls. The bolts can be purchased from an AliExpress link.
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed