Heater Blend Door Actuator Gear
2006-2010 Ford Explorer
Description
This is the small gear for a heater blend door actuator in a 2006 Ford Explorer. That model is the 2006 - 2010 so it should work in all of those years. If anyone needs the larger gear, I don't have it designed but definitely could if needed. Printed 15% Infill and 2 Walls with some PET-G Haven't done extensive testing but it is GUARANTEED up to 5 turns from hot to cold lol. Will update post with further testing and models if it fails. I did have to flip it upside down and press it over the metal shaft, and then I could fit it over normally, though I may update the model if it causes issues / you could always scale it up
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is the small gear for a heater blend door actuator in a 2006 Ford Explorer. That model is the 2006 - 2010 so it should work in all of those years. If anyone needs the larger gear, I don't have it designed but definitely could if needed. Printed 15% Infill and 2 Walls with some PET-G Haven't done extensive testing but it is GUARANTEED up to 5 turns from hot to cold lol. Will update post with further testing and models if it fails. I did have to flip it upside down and press it over the metal shaft, and then I could fit it over normally, though I may update the model if it causes issues / you could always scale it up
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed