Sun Visor Clip
2006 Honda Accord
Description
My 2006 Honda Accord sun visor clip broke. I tried printing and using clips for other Hondas but they didn't fit exactly right. So I designed my own. First time using fusion 360, so please don't judge the design too harshly. One note... to remove the original clip, there is a hole in the back of the clip, stick a screwdriver in there and push. Then rotate the clip 90 degrees and it should pop right out.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
My 2006 Honda Accord sun visor clip broke. I tried printing and using clips for other Hondas but they didn't fit exactly right. So I designed my own. First time using fusion 360, so please don't judge the design too harshly. One note... to remove the original clip, there is a hole in the back of the clip, stick a screwdriver in there and push. Then rotate the clip 90 degrees and it should pop right out.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed