Cup Holder Brace
2006 Infiniti G35
Description
This is a replacement for the spring loaded cupholder spacer for a 2006 Infinity G35. They often break after trying to push them back down after pulling them up out of place with too big of a cup, as you probably know if you're reading this. This will fit the existing springs and holes perfectly, I used it in my G35 for months until it got soft from the heat on a summer day and fell out since I used PLA. I suggest using ABS or PETG instead.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a replacement for the spring loaded cupholder spacer for a 2006 Infinity G35. They often break after trying to push them back down after pulling them up out of place with too big of a cup, as you probably know if you're reading this. This will fit the existing springs and holes perfectly, I used it in my G35 for months until it got soft from the heat on a summer day and fell out since I used PLA. I suggest using ABS or PETG instead.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed