Antenna Cap
2006-2015 Mazda Mx-5 Miata NC
May 5, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
A cap to put in the hole left behind when you unscrew the factory radio antenna on various Mazda vehicles. I designed this to fit an NC model MX-5 Miata, but it will likely fit other vehicles as well. The stem is just tight enough that you should have to twist it while inserting in order to get it seated correctly.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
A cap to put in the hole left behind when you unscrew the factory radio antenna on various Mazda vehicles. I designed this to fit an NC model MX-5 Miata, but it will likely fit other vehicles as well. The stem is just tight enough that you should have to twist it while inserting in order to get it seated correctly.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed