Sun Visor Sunglasses Mount Clip
2006-2015 Mazda Mx-5 NC
Description
Most sun visor sunglasses clips I found on here did not seem to work with the mx-5 Nc so I made my own, there is a big and a small one which depends on the thickness of your sunglasses arms to which one you might need. I've also included the blank STL with no sunglasses clip so if for some reason your pair of sunglasses don't fit in either the big or the small clip you can model your own to suit. It is a tight fit but slides on to the visor from side. Would recommend printing on its side with a simple tree support for the clip part. I used PLA but I can imagine in hotter weather it might deform so you might want to use PETG or ABS etc.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Most sun visor sunglasses clips I found on here did not seem to work with the mx-5 Nc so I made my own, there is a big and a small one which depends on the thickness of your sunglasses arms to which one you might need. I've also included the blank STL with no sunglasses clip so if for some reason your pair of sunglasses don't fit in either the big or the small clip you can model your own to suit. It is a tight fit but slides on to the visor from side. Would recommend printing on its side with a simple tree support for the clip part. I used PLA but I can imagine in hotter weather it might deform so you might want to use PETG or ABS etc.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed