Radio Volume Knob
2006 Mini Cooper S R52
Description
This is the volume knob for the radio in a 2006 Mini Cooper S, R52. Our OEM knob sort of fell apart, so I recreated it with measurements from the radio, and referencing other's pictures online. It isn't a perfect match to the OEM part, but it's close enough. It's a tight fit on the shaft. If you can't get it on, either scale it up a slight bit, or open the Fusion 360 file and change the dimensions in Sketch 1. I may have made it a little longer than the stock knob, I had to just guess on the height from the pictures. You can modify the second extrude to shorten it as desired.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is the volume knob for the radio in a 2006 Mini Cooper S, R52. Our OEM knob sort of fell apart, so I recreated it with measurements from the radio, and referencing other's pictures online. It isn't a perfect match to the OEM part, but it's close enough. It's a tight fit on the shaft. If you can't get it on, either scale it up a slight bit, or open the Fusion 360 file and change the dimensions in Sketch 1. I may have made it a little longer than the stock knob, I had to just guess on the height from the pictures. You can modify the second extrude to shorten it as desired.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed