Sun Visor Clip
2007-2015 Fiat 500
Description
A simple design for a sun visor clip for the Fiat 500 (2007-2015). The original ones in my car broke so I designed my own in CAD. I recommend to print this with any heat resistant Filament like PETG or even ABS especially if you live in a hotter area. The first set I printed deformed significantly due to heat buildup in the car. Recommended orientation: on the flat side on the back of the actual clip
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
A simple design for a sun visor clip for the Fiat 500 (2007-2015). The original ones in my car broke so I designed my own in CAD. I recommend to print this with any heat resistant Filament like PETG or even ABS especially if you live in a hotter area. The first set I printed deformed significantly due to heat buildup in the car. Recommended orientation: on the flat side on the back of the actual clip
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed