Sun Visor Holder
2007 Fiat Grande Punto 199
Description
The sunvisor holder on fiat punto grande from 2007 model _199 has broken and was brittle i made measurements from the old ones and here is the result. feel free to improve on the design. make it in ABS or PETG as PLA is not stretchy enough i think. i have included the Fusion 360 file also. 15 % infill turned out good i printed mine at 0.15 mm rotate to print on its side for best result.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The sunvisor holder on fiat punto grande from 2007 model _199 has broken and was brittle i made measurements from the old ones and here is the result. feel free to improve on the design. make it in ABS or PETG as PLA is not stretchy enough i think. i have included the Fusion 360 file also. 15 % infill turned out good i printed mine at 0.15 mm rotate to print on its side for best result.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed