Fog Light Surrounds

Use the built-in measurement tool to verify fit before downloading or ordering.

Description

So I gutted my original plastic bumper to put it onto a Winch Plate. By doing this I lost the depth needed for the factory Fog lights. I then went and bought a pair from my local store to replace them with, as they were not the same size, I made bigger holes for these to fit in. There are 2 parts, the inner and outer part. First, hold the inner part over the existing hole trace the outline of it, and cut the hole to size, then slide the inner part in, you don't need to glue anything as there are screws that will hold it together when the outer ring is slid over the light. The new light will be going inside and the outer ring will keep this light in place. if you have any questions let me know. I used a 5" Fog light combo. similar to this: https://www.amazon.ae/LED-Moso-Waterproof-Driving-Warranty/dp/B07G91BY56/ref=sr_1_19?adgrpid=92969114572&dchild=1&gclid=CjwKCAjwrKr8BRB_EiwA7eFapsFWUdVc11Jrz8aVNcEJDgOSGZRP6lk0lGo3Y0vJNEYJMhCWA34suxoCyikQAvD_BwE&hvadid=409245238506&hvdev=c&hvlocphy=1000010&hvnetw=g&hvqmt=b&hvrand=11296311693359353677&hvtargid=kwd-306189938398&hydadcr=4398_1907357&keywords=offroad+lights+5+inch&qid=1603004602&sr=8-19&tag=googleaepcstd-21

Print Instructions

No special print instructions provided.

Loading pricing...