Center Console Latch
2007-2012 Nissan Altima
Description
The screws that hold these handles on strip out easily and they either get lost or broken. They're impossible to find in the 2-piece top tray/bottom tray handle design, so I printed one up in PLA. I suggest ABS for a longer term fix, but I was out and just trying to make sure it fits. I also suggest remixing this to use a #3 machine screw with nylon locking nut, rather than the recessed flat-head that backs out so easily (but again, this is just a first pass).
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The screws that hold these handles on strip out easily and they either get lost or broken. They're impossible to find in the 2-piece top tray/bottom tray handle design, so I printed one up in PLA. I suggest ABS for a longer term fix, but I was out and just trying to make sure it fits. I also suggest remixing this to use a #3 machine screw with nylon locking nut, rather than the recessed flat-head that backs out so easily (but again, this is just a first pass).
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed