Seat Tray Clip
2007 Nissan Titan
Description
This is a clip that holds the plastic tray to the back of the passenger seat on a 2007 Nissan Titan pickup. It may also be used in other vehicles but this part is very hard to find. It is a half piece meaning you will need to print 2 in ABS and use acetone or glue to join the halves. For ABS scale up 5% or so to account for shrinkage. Also, since it is a functional part I recommend 100% infill.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a clip that holds the plastic tray to the back of the passenger seat on a 2007 Nissan Titan pickup. It may also be used in other vehicles but this part is very hard to find. It is a half piece meaning you will need to print 2 in ABS and use acetone or glue to join the halves. For ABS scale up 5% or so to account for shrinkage. Also, since it is a functional part I recommend 100% infill.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed