Dual Gauge Pod
2007-2013 Mini Cooper R56
Description
A better gauge pod for the R56 mini cooper (and probably other 2nd gen versions). This screws into the back of the stock tachometer. Standard 52 mm gauges fit. Does not interfere with the dash and is visible at most steering wheel angles. A word of warning, the threads in the tachometer strip very easily especially if you are trying out pods like this again and again. Print with more than 20% infill so it won't wobble. Spacing for the holes was borrowed from someone else's model (https://www.thingiverse.com/thing:4630509)
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
A better gauge pod for the R56 mini cooper (and probably other 2nd gen versions). This screws into the back of the stock tachometer. Standard 52 mm gauges fit. Does not interfere with the dash and is visible at most steering wheel angles. A word of warning, the threads in the tachometer strip very easily especially if you are trying out pods like this again and again. Print with more than 20% infill so it won't wobble. Spacing for the holes was borrowed from someone else's model (https://www.thingiverse.com/thing:4630509)
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed