Trunk Lid Release Switch Trim
2008-2012 Chevrolet Malibu 7th Gen
Description
This is for whoever broke their trim piece holding the trunk lid release switch on the 7th gen (2008-2012) Chevy Malibu while trying to fix it. Modeled using an aftermarket part, should work with OEM too. I'd recommend printing with supports on the outer ring (the wider one). Make sure to let the part cool down before removing from build plate due to small tolerances with the switch itself. Minor sanding might be needed (on switch or printed part). GM part number to work with this - 15835338 https://www.rockauto.com/en/moreinfo.php?pk=2457676&cc=1501855&pt=4828&jsn=673
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is for whoever broke their trim piece holding the trunk lid release switch on the 7th gen (2008-2012) Chevy Malibu while trying to fix it. Modeled using an aftermarket part, should work with OEM too. I'd recommend printing with supports on the outer ring (the wider one). Make sure to let the part cool down before removing from build plate due to small tolerances with the switch itself. Minor sanding might be needed (on switch or printed part). GM part number to work with this - 15835338 https://www.rockauto.com/en/moreinfo.php?pk=2457676&cc=1501855&pt=4828&jsn=673
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed