Tail Light Bracket
2008 Dodge Avenger
Description
Designed to hold the tail light of my 2008 Dodge Avenger in place after the plastic clips on the original broke. I replaced the tail light but the plastic used for them seems to be brittle and the replacement broke so I designed this bracket. **Might warp from heat in warmer climates!** But it should still hold the light in place, just keep an eye on it. Print standing up such that the 45 degree angle is facing the bed. I only needed a support enforcer for the top bracket. **More detailed instructions coming.** Made with openSCAD and a somewhat parameterized version is available on [my GitHub](https://github.com/ABranchTooFar/3D-Stuff/tree/main/Avenger%20Tail%20Light%20Bracket).
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Designed to hold the tail light of my 2008 Dodge Avenger in place after the plastic clips on the original broke. I replaced the tail light but the plastic used for them seems to be brittle and the replacement broke so I designed this bracket. **Might warp from heat in warmer climates!** But it should still hold the light in place, just keep an eye on it. Print standing up such that the 45 degree angle is facing the bed. I only needed a support enforcer for the top bracket. **More detailed instructions coming.** Made with openSCAD and a somewhat parameterized version is available on [my GitHub](https://github.com/ABranchTooFar/3D-Stuff/tree/main/Avenger%20Tail%20Light%20Bracket).
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed