Reversing Camera Bracket
2008-2015 Skoda Superb Gen2
Description
After viewing [Lutz's excellent tutorial](https://youtu.be/5ZkOjmaM5ZI) on how to add a reversing camera to a Skoda Superb Gen2 I decided to give it a go. I wanted a bracket to hold it in place (similar to the metal one the original boot switch has) rather than just rely on friction like he did, which requires the hole to be perfect size. I printed this in ABS with 20% infill. It has 4mm walls so should easily be strong enough as long as you don't screw the bolts down too tight. Camera I used is [this one.](https://www.aliexpress.com/item/OEM-RCD510-RNS315-RNS510-RGB-Rear-View-Camera-Reversing-Camera-with-Cable-Harness-for-VW-Passat/1674071330.html?spm=a2g0s.9042311.0.0.78064c4dPFQPuU) I've included the Fusion360 file if you need to edit it, or let me know and I'll make any changes you need.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
After viewing [Lutz's excellent tutorial](https://youtu.be/5ZkOjmaM5ZI) on how to add a reversing camera to a Skoda Superb Gen2 I decided to give it a go. I wanted a bracket to hold it in place (similar to the metal one the original boot switch has) rather than just rely on friction like he did, which requires the hole to be perfect size. I printed this in ABS with 20% infill. It has 4mm walls so should easily be strong enough as long as you don't screw the bolts down too tight. Camera I used is [this one.](https://www.aliexpress.com/item/OEM-RCD510-RNS315-RNS510-RGB-Rear-View-Camera-Reversing-Camera-with-Cable-Harness-for-VW-Passat/1674071330.html?spm=a2g0s.9042311.0.0.78064c4dPFQPuU) I've included the Fusion360 file if you need to edit it, or let me know and I'll make any changes you need.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed