Speaker Mounts
2008-2014 Subaru Impreza Wrx
May 6, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
Remix of the 2015+ audio frog speaker mount. The opening is about 169mm with about a 6mm recess on the top for the speaker. The center cutout is about 150mm. The mounting holes were close to the edge, I drilled them out at 5/32 for the screws I was using and they hold fine.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
Remix of the 2015+ audio frog speaker mount. The opening is about 169mm with about a 6mm recess on the top for the speaker. The center cutout is about 150mm. The mounting holes were close to the edge, I drilled them out at 5/32 for the screws I was using and they hold fine.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed