52mm Vent Gauge Pod
2008 Subaru Legacy 4th gen (GT)
Description
This is a no cutting required 52mm gauge pod that I designed for my 08 LGT Remove the vent assembly from the left of the wheel as one piece (don't try to pop just the cover off it will snap. Ask me how I know) Remove the fins that control the direction of the air Route wiring as you will have ample access with the vent removed Install the gauge pods into the corresponding holes from the fins Reinstall and press the gauge into place Enjoy
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a no cutting required 52mm gauge pod that I designed for my 08 LGT Remove the vent assembly from the left of the wheel as one piece (don't try to pop just the cover off it will snap. Ask me how I know) Remove the fins that control the direction of the air Route wiring as you will have ample access with the vent removed Install the gauge pods into the corresponding holes from the fins Reinstall and press the gauge into place Enjoy
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed