Window Regulator Clip
2009 Hyundai I30
Description
These pesky bits are always breaking and require $200 to replace the _entire_ window regulator for a $0.20 plastic part! Berettah85 has made a remix of the part that is more heavy duty, so definitely go check his out [here](https://www.thingiverse.com/thing:3060432). I've found printing this thing so the longer edge prints vertically helps provide more support and prevents delamination along the forks where a lot of the force is applied. Applying a nice slathering of epoxy on the part where the metal rod clips in is a nice idea to keep everything nice and hard.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
These pesky bits are always breaking and require $200 to replace the _entire_ window regulator for a $0.20 plastic part! Berettah85 has made a remix of the part that is more heavy duty, so definitely go check his out [here](https://www.thingiverse.com/thing:3060432). I've found printing this thing so the longer edge prints vertically helps provide more support and prevents delamination along the forks where a lot of the force is applied. Applying a nice slathering of epoxy on the part where the metal rod clips in is a nice idea to keep everything nice and hard.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed