Headlamp Dust Cover
Description
Redid the STL so it was sized to fit a 2009 KIA Sportage, North American Model. This way no resizing by percent is needed, just print and use. I printed a round gasket from flex, but not really needed. A gum rubber band will work to. araymbox original works great, but is for a newer model. This should work for 2009-2010 for sure maybe down to 2006. 2011 was start of new body style
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Redid the STL so it was sized to fit a 2009 KIA Sportage, North American Model. This way no resizing by percent is needed, just print and use. I printed a round gasket from flex, but not really needed. A gum rubber band will work to. araymbox original works great, but is for a newer model. This should work for 2009-2010 for sure maybe down to 2006. 2011 was start of new body style
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed