Upper Glove Compartment 17mm Ball Mount
2009-2013 Toyota Corolla
Description
This is a 17mm ball mount which sandwiches into the upper glove compartment on a 2009-2013 Toyota Corolla. This can be used with a phone or GPS mount that is designed to attach using this sort of ball mount. Because cars get hot in the sun in the summer, this really needs to be printed in PETG or ABS. The walls are quite thin, as they needed to be able to fit within the existing panel gaps, so it isn't really meant to hold a ton of weight. Should be fine for a phone, GPS, or similar. Probably wouldn't use this to attach a tablet. This is just the mounting ball, but there are actual clips to hold the phone elsewhere on thingiverse, or you could buy something like this: https://www.amazon.com/VizGiz-Replacement-Gooseneck-Broadcast-Attachment/dp/B09YXR54ZT/ref=sr_1_14?sr=8-14
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a 17mm ball mount which sandwiches into the upper glove compartment on a 2009-2013 Toyota Corolla. This can be used with a phone or GPS mount that is designed to attach using this sort of ball mount. Because cars get hot in the sun in the summer, this really needs to be printed in PETG or ABS. The walls are quite thin, as they needed to be able to fit within the existing panel gaps, so it isn't really meant to hold a ton of weight. Should be fine for a phone, GPS, or similar. Probably wouldn't use this to attach a tablet. This is just the mounting ball, but there are actual clips to hold the phone elsewhere on thingiverse, or you could buy something like this: https://www.amazon.com/VizGiz-Replacement-Gooseneck-Broadcast-Attachment/dp/B09YXR54ZT/ref=sr_1_14?sr=8-14
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed