Wheel Cover Clip
2010-2012 Ford Fusion
Description
This is a small clip that can be used to repair broken retainer clips on the hubcaps for 2010-2012 ford Fusions. These clips are small, and careless install/removal of the caps can break the clips, preventing them from staying on the car. This small clip goes inside the bolt-holes where the clips are broken, replacing the clips. They aren't flexible as ABS (needed to survive outdoor car use) so the caps cannot be installed by simply pushing them on. the clips should be installed in the cap, then the cap installed by removing the (usually 3) lug nuts, installing the cap, then re-installing the lug nuts. Simple print, should be done in ABS for durability.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a small clip that can be used to repair broken retainer clips on the hubcaps for 2010-2012 ford Fusions. These clips are small, and careless install/removal of the caps can break the clips, preventing them from staying on the car. This small clip goes inside the bolt-holes where the clips are broken, replacing the clips. They aren't flexible as ABS (needed to survive outdoor car use) so the caps cannot be installed by simply pushing them on. the clips should be installed in the cap, then the cap installed by removing the (usually 3) lug nuts, installing the cap, then re-installing the lug nuts. Simple print, should be done in ABS for durability.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed