Lift Gate Bumper
2010 Subaru Forester
Description
Small bumper for the liftgate of a 2010 Subaru Forester. Meant to be printed in TPU, print on the heavier side, but 100% doesn't seem to be warranted. 6 walls and 20% seems adequate. YMMV. May fit other models, I haven't checked. Edit: V2 is 2mm wider, and 2mm taller. This allowed actual contact between the contact point of the lift gate and the bumper on my vehicle. I'll add the step files as well.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Small bumper for the liftgate of a 2010 Subaru Forester. Meant to be printed in TPU, print on the heavier side, but 100% doesn't seem to be warranted. 6 walls and 20% seems adequate. YMMV. May fit other models, I haven't checked. Edit: V2 is 2mm wider, and 2mm taller. This allowed actual contact between the contact point of the lift gate and the bumper on my vehicle. I'll add the step files as well.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed