Cup Holder Adapter
2010-2024 Toyota 4runner 5th Gen
Description
Cup holder fits inside the rubber cup holder insert for the 4Runner. Best fit for the cup holder near the front. You must have the rubber OEM cup holder insert for this to fit properly. Super Glue the base to the top, off set from the center, leaving about 1/2" to one side. This makes it so you can turn and position the cup holder to clear the coin holder. The Complete .STL file showing both files together is not recommended to print as one piece due to the complexity. Its easier to print both files separately then glue together.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Cup holder fits inside the rubber cup holder insert for the 4Runner. Best fit for the cup holder near the front. You must have the rubber OEM cup holder insert for this to fit properly. Super Glue the base to the top, off set from the center, leaving about 1/2" to one side. This makes it so you can turn and position the cup holder to clear the coin holder. The Complete .STL file showing both files together is not recommended to print as one piece due to the complexity. Its easier to print both files separately then glue together.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed