Scangauge Ii Steering Column Mount Spacer
2010-2024 Toyota 4runner 5th Gen
Description
The steering column for the 5th gen 4Runner is curved, while the ScanGuage II bottom is flat. This creates a spacer to fill the gap. I used 3M VHB tape to connect the two. Make sure to wipe the steering column plastic with rubbing alcohol to remove any oils that will prevent a strong bond. I placed the scanguage as far back as it would go with the steering wheel pressed in as far as it would go.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The steering column for the 5th gen 4Runner is curved, while the ScanGuage II bottom is flat. This creates a spacer to fill the gap. I used 3M VHB tape to connect the two. Make sure to wipe the steering column plastic with rubbing alcohol to remove any oils that will prevent a strong bond. I placed the scanguage as far back as it would go with the steering wheel pressed in as far as it would go.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed