Adblue Cap Wrench
2011-2018 Audi A6 C7
Description
This is a wrench for opening the Adblue cap of the Audi A6 (model C7). You can spin it around continuously when opening or closing.<br/> <br/> I have designed it because I did not want to use the wheel wrench which can provide too much torque and is too big to turn around continuously.<br/> <br/> If you have another car with a 17mm cap, it may fit to yours, as well.<br/> <h3>Important parameters for printing</h3> <ul> <li><b>Support:</b> No <li><b>Wall Thickness:</b> 4mm <li><b>Infill Density:</b> 30% <li><b>Infill Pattern:</b> Lines </ul> <h3>History</h3> <h4>Version 1.0.0</h4> First design
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a wrench for opening the Adblue cap of the Audi A6 (model C7). You can spin it around continuously when opening or closing.<br/> <br/> I have designed it because I did not want to use the wheel wrench which can provide too much torque and is too big to turn around continuously.<br/> <br/> If you have another car with a 17mm cap, it may fit to yours, as well.<br/> <h3>Important parameters for printing</h3> <ul> <li><b>Support:</b> No <li><b>Wall Thickness:</b> 4mm <li><b>Infill Density:</b> 30% <li><b>Infill Pattern:</b> Lines </ul> <h3>History</h3> <h4>Version 1.0.0</h4> First design
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed