Bi-led Headlight Brackets
2011-2015 Ford Explorer
Description
These are brackets to hold Koito Bi-LED 3" headlight units inside opened Ford Explorer 2011-2015 headlight cases. In my case I used headlights ordered off Ebay as original headlights are very expensive. To fit the Koito LED, Unplug the front wire of the unit, unscrew the glass lens part and the top flat metal bracket, then fit the body of the LED light onto the bracket, put the flat metal bracket back on, and screw it back in. The fit is very snug. You will need to drill holes for the screws that will hold the light on the bracket yourself. I highly suggest printing this in black ABS or ABS/PC plastic, as that's what's commonly used in car parts. I can't say if these fit exactly the same way inside the original Ford headlights (rather than cheaper copies) if opened. Feel free to contact me if you have questions.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
These are brackets to hold Koito Bi-LED 3" headlight units inside opened Ford Explorer 2011-2015 headlight cases. In my case I used headlights ordered off Ebay as original headlights are very expensive. To fit the Koito LED, Unplug the front wire of the unit, unscrew the glass lens part and the top flat metal bracket, then fit the body of the LED light onto the bracket, put the flat metal bracket back on, and screw it back in. The fit is very snug. You will need to drill holes for the screws that will hold the light on the bracket yourself. I highly suggest printing this in black ABS or ABS/PC plastic, as that's what's commonly used in car parts. I can't say if these fit exactly the same way inside the original Ford headlights (rather than cheaper copies) if opened. Feel free to contact me if you have questions.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed