Driver-side Cubby Modular Mounting Base
2011 Ram 2500
Description
This is a base to create mounts for my 2011 ram 2500. probably fits other ram trucks with the same interior. It slides into the cubby on the drivers side, and provides a 20mm x 20mm holes. I sized the holes to use m3 heat set inserts. Its got tabs on the bottom to lock it into place and make it easy to remove. You could mirror the mount to make it fit in the passenger side cubby.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a base to create mounts for my 2011 ram 2500. probably fits other ram trucks with the same interior. It slides into the cubby on the drivers side, and provides a 20mm x 20mm holes. I sized the holes to use m3 heat set inserts. Its got tabs on the bottom to lock it into place and make it easy to remove. You could mirror the mount to make it fit in the passenger side cubby.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed