Mud Flaps
2011-2018 Volkswagen Jetta MK6
Description
I made mud flaps because buying them is way too expensive, and non of the options look subtle enough. Printed with TPU with 1mm nozzle, 100% infill. Tested in all weather conditions for a full year, from +40C to -40C, on gravel, sand, snow, road salt, etc. Shows no signs of degradation, still looks new after cleaning. Reinforce the inside of the flap by drilling a hole and zip tying to the wheel well liner.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I made mud flaps because buying them is way too expensive, and non of the options look subtle enough. Printed with TPU with 1mm nozzle, 100% infill. Tested in all weather conditions for a full year, from +40C to -40C, on gravel, sand, snow, road salt, etc. Shows no signs of degradation, still looks new after cleaning. Reinforce the inside of the flap by drilling a hole and zip tying to the wheel well liner.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed