Trunk Led Light Support
2012-2017 Ford Fiesta MK7
Description
# Light Trunk LED *For Ford fiesta MK7 (2012-2017)* <sub> <img src="https://cdn3.focus.bg/autodata/i/ford/fiesta/fiesta-vi-mk7-mk8/medium/5f95f6ee7628df63ef880d8f3ac91f3a.jpg" alt="Car" width="200"/> <img src="https://cdn.thingiverse.com/assets/99/52/20/56/8c/057593da-321f-43f4-b506-f4f6c6ed2c49.jpg" alt="Model" width="200"/> <img src="https://cdn.thingiverse.com/assets/6a/c7/d8/bb/50/c6498fe3-224d-44ee-bc19-adb4e4e78b2e.jpg" alt="Sketch" width="100"/> <img src="https://cdn.thingiverse.com/assets/8b/e8/f0/1f/d0/2b413e66-4e8b-4b80-89c3-b7f6d883b554.JPG" alt="Sketch" width="100"/> <img src="https://cdn.thingiverse.com/assets/e1/6f/e8/a1/18/featured_preview_3fb65627-dc05-4d73-8e98-59dcb58c0c4b.JPG" alt="Sketch" width="100"/> A support for a led made in <abbr title="From china">**Black PLA**</abbr>. I was bored of the lack of light in my ford fiesta trunk so I made an extra light that I reused from other project. **You don't need any glue** ###### [PandaoEditor](https://pandao.github.io/editor.md/en.html "PandaoEditor") <p> <sub>Made by Jaguare19</sub> <p>
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
# Light Trunk LED *For Ford fiesta MK7 (2012-2017)* <sub> <img src="https://cdn3.focus.bg/autodata/i/ford/fiesta/fiesta-vi-mk7-mk8/medium/5f95f6ee7628df63ef880d8f3ac91f3a.jpg" alt="Car" width="200"/> <img src="https://cdn.thingiverse.com/assets/99/52/20/56/8c/057593da-321f-43f4-b506-f4f6c6ed2c49.jpg" alt="Model" width="200"/> <img src="https://cdn.thingiverse.com/assets/6a/c7/d8/bb/50/c6498fe3-224d-44ee-bc19-adb4e4e78b2e.jpg" alt="Sketch" width="100"/> <img src="https://cdn.thingiverse.com/assets/8b/e8/f0/1f/d0/2b413e66-4e8b-4b80-89c3-b7f6d883b554.JPG" alt="Sketch" width="100"/> <img src="https://cdn.thingiverse.com/assets/e1/6f/e8/a1/18/featured_preview_3fb65627-dc05-4d73-8e98-59dcb58c0c4b.JPG" alt="Sketch" width="100"/> A support for a led made in <abbr title="From china">**Black PLA**</abbr>. I was bored of the lack of light in my ford fiesta trunk so I made an extra light that I reused from other project. **You don't need any glue** ###### [PandaoEditor](https://pandao.github.io/editor.md/en.html "PandaoEditor") <p> <sub>Made by Jaguare19</sub> <p>
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed