Center Console Tray
2012 Ford Focus MK3
Description
This is a tray for the centerconsole of a Ford Focus 2012. I removed the "Ford" logo in the STL because i dont want to get in trouble with the trademark. On the other hand the logo is due to the swung font not easy to print. I did many tests but everytime it looked bad. A just plain surface looks even better. Print it in 0.3mm resolution and with support. Takes about 5 hours to print. Print with 3 top layers for a good looking surface
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a tray for the centerconsole of a Ford Focus 2012. I removed the "Ford" logo in the STL because i dont want to get in trouble with the trademark. On the other hand the logo is due to the swung font not easy to print. I did many tests but everytime it looked bad. A just plain surface looks even better. Print it in 0.3mm resolution and with support. Takes about 5 hours to print. Print with 3 top layers for a good looking surface
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed