Auxiliary Trim Plate
Description
This fits several different Ford models. This replaces your aux input panel (Ford part # CV6Z-19C149-A) with more useful USB chargers. These are PD 3.0 and QC 4+ compatible, so they will charge devices very quickly. I recommend printing in ASA filament. You'll need to run 12 volts to the panel. I've designed places for 2-hole Wagos for easier wiring, but they are not required. Requires: https://www.amazon.com/gp/aw/d/B0CHMDPXSZ?psc=1&ref=ppx_pop_mob_b_asin_title 4- m3x10mm screws 2- 2 hole Wago lever lock nuts (optional) Wire Solder Fits several Ford vehicles built from 2012-2019: C-Max, Taurus, Edge, Explorer, Escape, Flex, Police Interceptor, and Focus.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This fits several different Ford models. This replaces your aux input panel (Ford part # CV6Z-19C149-A) with more useful USB chargers. These are PD 3.0 and QC 4+ compatible, so they will charge devices very quickly. I recommend printing in ASA filament. You'll need to run 12 volts to the panel. I've designed places for 2-hole Wagos for easier wiring, but they are not required. Requires: https://www.amazon.com/gp/aw/d/B0CHMDPXSZ?psc=1&ref=ppx_pop_mob_b_asin_title 4- m3x10mm screws 2- 2 hole Wago lever lock nuts (optional) Wire Solder Fits several Ford vehicles built from 2012-2019: C-Max, Taurus, Edge, Explorer, Escape, Flex, Police Interceptor, and Focus.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed