Shifter Base Bushings
Description
Solid shifter base bushing inserts for the MK3 FOST! As pictured, they are designed to re use the metal washer/sleeve insert that the stock rubber bushings contain. I recommend some electrical tape to help hold the inserts in place on installation, I attempted to tolerance them to friction fit but the bosses in my shifter base were too inconsistent. I printed mine with 100% infill, 5 top/ bottom shell layers, and 5 wall loops. Printed in Overture ASA, nozzle temp 260/ bed temp 90. I will update if the parts deteriorate in any way, however I do not expect them to.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Solid shifter base bushing inserts for the MK3 FOST! As pictured, they are designed to re use the metal washer/sleeve insert that the stock rubber bushings contain. I recommend some electrical tape to help hold the inserts in place on installation, I attempted to tolerance them to friction fit but the bosses in my shifter base were too inconsistent. I printed mine with 100% infill, 5 top/ bottom shell layers, and 5 wall loops. Printed in Overture ASA, nozzle temp 260/ bed temp 90. I will update if the parts deteriorate in any way, however I do not expect them to.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed