Seat Gap Filler Insert
2013-2021 Nissan Qashqai J11
Description
The insert fits between the center console and the car seat. It prevents small items from falling in and serves as a useful box for cell phones, etc. There is a driver's seat (...links.stl) and passenger seat (...rechts.stl) model. The models "Autositz_v12_links_hoch" and "Autositz_v12_rechts_hoch" are approx. 1 cm higher. Printed from PETG or harder TPU on a Sidewinder X2 with a 30 x 30 cm build plate. Now also available in a wider (..breiter..) version. To prevent slipping, double-sided adhesive tape can help.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The insert fits between the center console and the car seat. It prevents small items from falling in and serves as a useful box for cell phones, etc. There is a driver's seat (...links.stl) and passenger seat (...rechts.stl) model. The models "Autositz_v12_links_hoch" and "Autositz_v12_rechts_hoch" are approx. 1 cm higher. Printed from PETG or harder TPU on a Sidewinder X2 with a 30 x 30 cm build plate. Now also available in a wider (..breiter..) version. To prevent slipping, double-sided adhesive tape can help.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed