Sun Visor Mount
2013 Subaru Brz
Description
Driver Side (Left) and Passenger Side (Right) sun visor mounts for the Subaru BRZ/Scion FRS/Toyota FT86. It was designed off of the 2013 BRZ and should fit other years and models. Subaru and Toyota do not sell the mount itself but only sell the visor as a complete assembly for too much money. Also included are visor deletes. NOTE: PLA will soften in normal summer temperatures. You need to print this with high temperature resistant filament. I printed mine in Prusament PC Blend. Installation: 1. Before installing in the car, heat up the clip portion of the mount with a heat gun or hair drying. 2. Insert visor into clip. 3. Squeeze hot clip around the visor post. 4. Let cool. 5. Mount in car.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Driver Side (Left) and Passenger Side (Right) sun visor mounts for the Subaru BRZ/Scion FRS/Toyota FT86. It was designed off of the 2013 BRZ and should fit other years and models. Subaru and Toyota do not sell the mount itself but only sell the visor as a complete assembly for too much money. Also included are visor deletes. NOTE: PLA will soften in normal summer temperatures. You need to print this with high temperature resistant filament. I printed mine in Prusament PC Blend. Installation: 1. Before installing in the car, heat up the clip portion of the mount with a heat gun or hair drying. 2. Insert visor into clip. 3. Squeeze hot clip around the visor post. 4. Let cool. 5. Mount in car.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed