Shifter Sleeve
2013-2014 Ford Mustang S197
Description
Latest update. The file is now modified with the correct thread for the shift stick, I would advise cleaning the thread with 12mm 1.25 tap to make installation easier. I also increased the size of the lower ring so it grips the plether gaiter better The old files are now deleted. This is a cover for the stick shift on a 2013 mustang when fitting the fake Aliexpress FMR gear shifter knob. The lower doughnut clicks into the factory gaiter and should fit in a 66mm diameter shifter knob. The image shows it painted in silver when aerosol, due to the supports needed I think painting is best to cover any residue marks unless you wanna try buffing silk finish silver filament. If you print right side up with tree supports touching the build plate, it will come out with virtually no cleanup
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Latest update. The file is now modified with the correct thread for the shift stick, I would advise cleaning the thread with 12mm 1.25 tap to make installation easier. I also increased the size of the lower ring so it grips the plether gaiter better The old files are now deleted. This is a cover for the stick shift on a 2013 mustang when fitting the fake Aliexpress FMR gear shifter knob. The lower doughnut clicks into the factory gaiter and should fit in a 66mm diameter shifter knob. The image shows it painted in silver when aerosol, due to the supports needed I think painting is best to cover any residue marks unless you wanna try buffing silk finish silver filament. If you print right side up with tree supports touching the build plate, it will come out with virtually no cleanup
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed